Stainless Steel 310 Pipe Flanges, SS 310 Weld Neck Flange, ANSI B16.5 SS 310 Orifice Flange, SS 310 Nippo Flanges, SS UNS S31000 Pipe Flanges, Stainless Steel 310 RTJ Flange Supplier in UAE.
Metallon Pipings FZ LLC is one of the prominent dealer and whole seller for high quality SS 310 Flanges, where the heat treatment is given on the continuously rolling hearth furnace and the furnace is fitted with temperature recorders and controllers. After the heat treatment process, Stainless Steel 310 Slip On Flanges and pipes are straightened and subjected to pickling for removing scales from the surface. In some cases, the required size of Stainless Steel 310 Threaded Flanges may not be obtained from the mill directly, so then the cold operation process can be used to obtain the desired size. In cold drawing process, Stainless Steel 310 Weld Neck Flanges are coated with oxalic and soap solution.
ANSI B16.5 SS 310 Ring Type Joint Flanges, Stainless Steel 310 Nippolet Flanges, ASME SA182 Stainless Steel 310 Industrial Flanges, SS GOST 20Ch25N20S2 Screwed Flanges Stockist, SS 310 Forged Flanges, 150# ANSI SS 310 Flanges Stockholder, Manufacturer in UAE.
This solution in Stainless Steel 310 Blind Flanges acts as a lubricant to reduce friction while cold drawing operation. In the cold drawing process, Stainless Steel UNS S31000 Socket Weld Flanges is drawn over the bench using die plugs. The drawn – out Stainless Steel 310 Lap Joint Flanges is then subjected to cleaning, heat treatment, pickling and straightening. Stainless Steel 310 Ring Joint Type Flanges is marked with grade of material, size, heat number and the stamp of third party inspection before passing on to stainless steel pipe exporters. Stainless Steel 310 Spectacle Blind Flanges thus produced will undergo certain testing and quality checks. This process for Stainless Steel 310 Spacer Flanges is followed by proper packing and dispatch.
Standard Specification For SS 310 Flanges
Specifications
ASTM A182 / ASME SA182
Size
1/2″ (15 NB) to 48″ (1200NB)
Standards
ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
SS 310 Pipe Flanges Chemical Composition
Grade
C
Mn
Si
P
S
Cr
Mo
Ni
N
SS 310
0.015 max
2 max
0.015 max
0.020 max
0.015 max
24.00 – 26.00
0.10 max
19.00 – 21.00
54.7 min
SS 310 Plate Flanges Mechanical Properties
Density
Melting Point
Tensile Strength
Yield Strength (0.2%Offset)
Elongation
7.9 g/cm3
1402 °C (2555 °F)
Psi – 75000 , MPa – 515
Psi – 30000 , MPa – 205
40 %
SS 310 Plate Flanges Equivalent Grades
STANDARD
WERKSTOFF NR.
UNS
JIS
BS
GOST
AFNOR
EN
SS 310
1.4841
S31000
SUS 310
310S24
20Ch25N20S2
–
X15CrNi25-20
Stainless Steel 310 Flanges Packaging
Stainless Steel 310 Flanges are widely used in various industries including petrochemical, oil and gas, power generation, bulk liquid transportation, chemicals, pharmaceuticals, pulp and paper manufacturing, textiles and others. All our SS 310 Flange are manufactured in accordance with international standards. Stainless Steel 310 Pipe Flange are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All Stainless Steel 310 Plate Flanges are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on 310 Stainless Steel Flanges.
Contact us to know more.
Looking for more details on our products? Fill up the form and our team of experts will contact you shortly
