Stainless Steel 347 Nippolet Flanges, Stainless Steel 347H RTJ Flange, SS UNS S34700 Pipe Flanges, SS 347H Slip On Flanges, Stainless Steel 347H Pipe Flanges, ANSI B16.5 SS 347 Orifice Flange Supplier in UAE.
Metallon Pipings FZ LLC leading stockiest, exporter, and supplier of SS 347 Flanges, which combines excellent mechanical properties over a wide temperature range with superior oxidation and corrosion resistance. The excellent relaxation resistance of Stainless Steel 347h Slip On Flanges is a factor in its successful use for springs at temperatures up to 1100 Degree F. Because of these properties, Stainless Steel 347 Threaded Flanges is specified for many fastener applications where superior performance is required under varying environmental conditions. They were made from hot – rolled, annealed, and joined with diameter in Stainless Steel 347h Weld Neck Flanges by the gas tungsten – arc process.
ASTM A182 SS F347 Threaded Flanges, SS 347h Nippo Flanges, SS DIN 1.4550 Socket Weld Flanges, SS 347h Blind Flanges, ASME SA182 SS 347 Lap Joint Flange, 347h SS WNRF Flanges Exporter, SS 347 Spectacle Blind Flange, SS 347h Spade Flange, SS GOST 08Ch18N12B Weld Neck Flange Dealer.
These heat treatments and the applications for which Stainless Steel UNS S34700 Blind Flanges are intended are described in the Mechanical Properties. The microstructure of Stainless Steel 347h Socket Weld Flanges, especially with regard to the effects of heat treatment, has been extensively studied and reported. Stainless Steel 347 Lap Joint Flanges can be strengthened in two ways: (1) by solution treating and age hardening or (2) by cold working and age hardening only. Stainless Steel 347 Ring Joint Type Flanges is an age – hardenable austenitic material, where weldments were found to have room – temperature fatigue strength. Strength of Stainless Steel 347 Spectacle Blind Flanges is largely dependent on the precipitation of a gamma prime phase during heat treatment. In comparable tests, Stainless Steel 347h Spacer Flanges had fatigue strength.
Standard Specification For SS 347/ 347H Flanges
Specifications
ASTM A182 / ASME SA182
Size
1/2″ (15 NB) to 48″ (1200NB)
Standards
ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
SS 347/ 347H Pipe Flanges Chemical Composition
Grade
C
Mn
Si
P
S
Cr
Mo
Ni
N
SS 347
0.08 max
2.0 max
1.0 max
0.045 max
0.030 max
17.00 – 20.00
10xC – 1.10
9.00 – 13.00
62.74 min
SS 347H
0.04 – 0.10
2.0 max
1.0 max
0.045 max
0.030 max
17.00 – 20.00
8xC – 1.10
9.00 – 13.00
63.72 min
SS 347/ 347H Plate Flanges Mechanical Properties
Grade
Density
Melting Point
Tensile Strength
Yield Strength (0.2%Offset)
Elongation
SS 347
8.0 g/cm3
1454 °C (2650 °F)
Psi – 75000 , MPa – 515
Psi – 30000 , MPa – 205
35 %
SS 347H
8.0 g/cm3
1454 °C (2650 °F)
Psi – 75000 , MPa – 515
Psi – 30000 , MPa – 205
35 %
Equivalent Grades for SS 347/ 347H Flanges
STANDARD
WERKSTOFF NR.
UNS
JIS
BS
GOST
AFNOR
EN
SS 347
1.4550
S34700
SUS 347
–
08Ch18N12B
–
X6CrNiNb18-10
SS 347H
1.4961
S34709
SUS 347H
–
–
–
X6CrNiNb18-12
Stainless Steel 347/ 347H Flanges Packaging
Stainless Steel 347/ 347H Flanges are widely used in various industries including petrochemical, oil and gas, power generation, bulk liquid transportation, chemicals, pharmaceuticals, pulp and paper manufacturing, textiles and others. All our SS 347/ 347H Flange are manufactured in accordance with international standards. Stainless Steel 347/ 347H Pipe Flange are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All Stainless Steel 347/ 347H Plate Flanges are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on 347/ 347H Stainless Steel Flanges.
Contact us to know more.
Looking for more details on our products? Fill up the form and our team of experts will contact you shortly
